Litcessory Cut-End Connector for Philips Hue Lightstrip Plus (4 Pack, White - MICRO 6-PIN V4)

The Philips Hue Lightstrip system is a great lighting solution, but it only allows for a single, continuous lightstrip run. Litcessory products, however, offer a solution that enables you to connect multiple lightstrip segments together.

The Cut-End to Cut-End Connector, specifically designed for the Philips Hue Lightstrip system, is a great tool for reusing the ends of cut light strips. This connector allows you to directly connect one cut lightstrip to another, eliminating the need to waste costly lightstrip pieces.

It's important to note that this connector is suitable for indoor dry locations only and supports total lightstrip runs up to 33 feet/10 meters, including the lightstrips and any extension cables.

Frequently Asked Questions:

Q: Will Litcessory products cause my lightstrip to be dimmer? A: No, Litcessory products do not affect the brightness of the lights, as long as the total lightstrip run length (lightstrips plus any Litcessory product length) stays within the 10-meter/33-foot limit.

Q: What is reverse polarity, and how do I fix it? A: Reverse polarity occurs when the 6-pin connector is plugged in the wrong way, reversing the flow of electricity and preventing the lightstrip from turning on. This is a common issue, but it can be easily fixed by ensuring the connection points on the lightstrip are making proper contact with the metal prongs in the connector.

Q: I used a cut-end connector, and now my lightstrip colors don't match. How do I fix this? A: If the colors are not matching after using the cut-end connector, it means the connection is not secure. Try the following steps: unplug the power, ensure the connection points are making contact with the metal prongs, close the lid and clamp down with pliers, and consider wrapping the connector with electrical tape to keep it tightly in place.

Q: Can you insert 6-pin connectors into the cut-end connector? A: No, you cannot insert a 6-pin connector into the cut-end connector. If you need to connect a cut lightstrip to a 6-pin connector, you will need to use our Cut-End to 6-Pin cable.

Q: Can I plug an extension cable into a Cut-End to Cut-End Connector? A: No, to connect an extension cable to a cut lightstrip, you will need to use our 6-Pin to Cut-End Connector.

The step-by-step installation guide for the Cut-End Connector is provided, with clear instructions and visuals to help you through the process.

product information: